mel jacobson on fri 10 feb 06
just want to remind folks that the
set of plans for the mini/flat top kiln
are still on the pmi website and can
be downloaded and printed.
who knows when that site will disappear.
so, go to:
http://www.potterymaking.org/FlattopKiln_Complete.pdf
remember, it takes a bit to load a pdf file, so be patient.
mel
back from the east coast ocean. a bit of r and r.
from mel/
website http://my.pclink.com/~melpots3
Pfeiffer, Dan R (Dan) on fri 10 feb 06
Mel,
In the plans it talks about being easy to scale but I am not sure as to
just how to do this. We would like to build one with about 25 to 30 feet
of stacking space in it. Would I just add the same percentage of
increase to both wall length and height and then round to the nearest
brick? Would you keep the burner holes the same number of bricks away
from the wall?
Thanks
=20
>>>
just want to remind folks that the
set of plans for the mini/flat top kiln
are still on the pmi website.>>
Dan & Laurel in Elkmont Al=20
Pfeiffer Fire Arts=20
www.pfeifferfirearts.com
Potters Council Members=20
| |
|
