search  current discussion  categories  techniques - misc 

glaze resist using elmers glue

updated fri 9 dec 05

 

Elizabeth on wed 7 dec 05


OK, so my high school ceramics class was a long time ago-- just long enough
ago that I remember certain techniques, but not all the details associated
with them.

Here's my dilemma -- I remembered that you can apply Elmer=92s glue to bisqu=
e
before glazing, and the glaze won't stick there. So that's what I did,
except I didn't immediately wipe off the areas with the glue like I think I
was supposed to. Now the glaze has dried and it sure looks like it will
stay put-- even though I used the glue to resist glaze as part of a
decorative effect.

A few questions-- should I have immediately wiped off the wet glaze in the
areas I applied the glue? If not, what am I missing here? If so, now what
do I do now? Is there anything I can do to "unglaze" the decorative
portions I intended to have no glaze?

Thanks in advance for any advice you can offer.

Elizabeth

mtigges@NOSPAM.SHAW.CA on thu 8 dec 05


On Wed, Dec 07, 2005 at 11:03:46PM -0500, Elizabeth wrote:
> OK, so my high school ceramics class was a long time ago-- just lon=
g enough
> ago that I remember certain techniques, but not all the details ass=
ociated
> with them.
>=20
> Here's my dilemma -- I remembered that you can apply Elmer=92s glue=
to bisque
> before glazing, and the glaze won't stick there. So that's what I d=
id,
> except I didn't immediately wipe off the areas with the glue like I=
think I
> was supposed to. Now the glaze has dried and it sure looks like it =
will
> stay put-- even though I used the glue to resist glaze as part of a
> decorative effect.
>=20
> A few questions-- should I have immediately wiped off the wet glaze=
in the
> areas I applied the glue? If not, what am I missing here? If so, n=
ow what
> do I do now? Is there anything I can do to "unglaze" the decorative
> portions I intended to have no glaze?
>=20
> Thanks in advance for any advice you can offer.
>=20
> Elizabeth
>=20

I would use steel wool to rub it off. But I would also do it outside
and wear a mask, the dust is horrible.

And next time ... use latex. =20

Mark.