search  current discussion  categories  glazes - crazing & crackle 

glaze crazing -> glaze calc software by hand

updated fri 22 apr 05

 

Louis Katz on tue 19 apr 05


If two pots are identical in appearance and one is wood fired the other
gas are they different.
If you prefer wood regardless of appearance perhaps you should prefer
glazes calculated with a slide rule.

First thing I did after I really understood glaze calculation was write
a program for the mainframe at Uof Mich, late 1975. Even with having to
go to the computer lab, and punching cards it was a great savings in
time. Cost 23 cents a recipe or so I think. I think that most of the
savings in glaze calc from software is having all the information
readily available and all in the same format.

The Rhodes book was the only guide I had. It is a great book but it
presents glaze calc in a complicated way. Once I understood it and
really analized what I was doing I just hit my head and realized I
understood the principles before I started and that if the problem was
just stated really clearly I would have known how to answer it.

Louis

Ron Roy on thu 21 apr 05


I also learned to calculate from the description in the Rhodes book.

The great failure in that method was the use of generic formula for the
materials. In order to get any reasonable accuracy you need to use typical
analysis of the materials you are using - and those used to by others - if
you want to try to duplicate a glaze.

The point is - use the most accurate analysis you can get - which means
from the mine when you can get em.

RR


>The Rhodes book was the only guide I had. It is a great book but it
>presents glaze calc in a complicated way. Once I understood it and
>really analized what I was doing I just hit my head and realized I
>understood the principles before I started and that if the problem was
>just stated really clearly I would have known how to answer it.
>
>Louis


Ron Roy
RR#4
15084 Little Lake Road
Brighton, Ontario
Canada
K0K 1H0
Phone: 613-475-9544
Fax: 613-475-3513

Paul Lewing on thu 21 apr 05


on 4/21/05 9:44 AM, Ron Roy at ronroy@CA.INTER.NET wrote:

> I also learned to calculate from the description in the Rhodes book.

I didn't. I tried to teach myself using that book twice when I ws in grad
school, and could never figure it out from his explanation and example.
Years later, I did teach myself how to do it using other books. Only then
did I figure out that the math in Rhodes' book's example was wrong! No
wonder I never could make sense of it!
Paul Lewing, Seattle