Bonnie Staffel on sat 15 may 04
John, you might look at the brass colored welding rods. They come in
different thicknesses and can be cut with a hack saw so that you can match
the length. Purchasing just one rod would not break the bank. You could
even make a few new lengths to suit your trimming needs. Thanks for giving
me a good idea.
Hope this helps,
Bonnie Staffel
http://pws.chartermi.net/~bstaffel/default.html
http://www.vasefinder.com/
Sam or Mary Yancy on sat 15 may 04
Suggest Contact Griffin and ask for one. I lost a couple in a move some years ago and they sent me a set FREE. They are great to deal with - and make a very usefullproduct. Sam in Daly City
Bonnie Staffel wrote:John, you might look at the brass colored welding rods. They come in
different thicknesses and can be cut with a hack saw so that you can match
the length. Purchasing just one rod would not break the bank. You could
even make a few new lengths to suit your trimming needs. Thanks for giving
me a good idea.
Hope this helps,
Bonnie Staffel
http://pws.chartermi.net/~bstaffel/default.html
http://www.vasefinder.com/
______________________________________________________________________________
Send postings to clayart@lsv.ceramics.org
You may look at the archives for the list or change your subscription
settings from http://www.ceramics.org/clayart/
Moderator of the list is Mel Jacobson who may be reached at melpots@pclink.com.
| |
|
