search  current discussion  categories  techniques - spraying 

spraying salt onto your ware

updated fri 17 may 02

 

bruec@anv.net on wed 15 may 02


Haven't used salt, but have achieved some interesting results using soda
ash.
Not unlike either salt or wood firing. I dipped into the soda ash solution
prior to glazing, leaving some areas only coa=
ted with the soda ash. Use alumina on the feet or put the piece on wads, if
you get any soda ash on the feet.

Original Message:
-----------------
From: Kat in the Hat kat@DIGITALFIRE.COM
Date: Wed, 15 May 2002 08:58:51 -0600
To: CLAYART@LSV.CERAMICS.ORG
Subject: Spraying Salt onto your ware


Hey All:
Has anybody mixed salt and water into a spray bottle
and just lightly mist freshly glazed ware, pop it
into the kiln and Presto....... What could I expect?
Or is this a big no no?
(Watched a documentary on J.R. Tolkien the other day
What an amazing man, he wrote back to every person
that wrote him admiring his work. There is a man that
wasn't to Big for his Breeches.)
Kat
kat@digitalfire.com



____________________________________________________________________________
__
Send postings to clayart@lsv.ceramics.org

You may look at the archives for the list or change your subscription
settings from http://www.ceramics.org/clayart/

Moderator of the list is Mel Jacobson who may be reached at
melpots@pclink.com.

--------------------------------------------------------------------
mail2web - Check your email from the web at
http://mail2web.com/ .

Tony Ferguson on wed 15 may 02


Kat,

Yes, presto is usually the case but sometime you get crusto or eat'o into
the pot'o. 100 grams in a medium sized spray bottle is usually sufficient
to cause some nice action on the surface. Keep records because too much
salt will not be good. Be aware that salt likes to eat softbrick. The
amount you are spraying is very very minimal in terms of let's say a hi soda
ash glaze. Don't worry about the salt spritz hurting your kiln unless you
have a very very very concentrated spray. If you are doubtful, spray
various amount a test brick and fire it to see what happens.
Good skill'in to you!

Tony

Thank you.

Tony Ferguson
Stoneware, Porcelain, Raku
www.aquariusartgallery.com
218-727-6339
315 N. Lake Ave
Apt 312
Duluth, MN 55806


----- Original Message -----
From: "Kat in the Hat"
To:
Sent: Wednesday, May 15, 2002 7:58 AM
Subject: Spraying Salt onto your ware


Hey All:
Has anybody mixed salt and water into a spray bottle
and just lightly mist freshly glazed ware, pop it
into the kiln and Presto....... What could I expect?
Or is this a big no no?
(Watched a documentary on J.R. Tolkien the other day
What an amazing man, he wrote back to every person
that wrote him admiring his work. There is a man that
wasn't to Big for his Breeches.)
Kat
kat@digitalfire.com



____________________________________________________________________________
__
Send postings to clayart@lsv.ceramics.org

You may look at the archives for the list or change your subscription
settings from http://www.ceramics.org/clayart/

Moderator of the list is Mel Jacobson who may be reached at
melpots@pclink.com.

Ditmar on wed 15 may 02


Hate to rain on your parade, but I'm speaking from personal
experience.........
All I ever got those many years ago was a very impersonal form letter from
his publisher.

Ditmar

Just because you believe it, doesn't make it true.

----- Original Message -----
From: "Kat in the Hat"
To:
Sent: Wednesday, May 15, 2002 4:58 AM
Subject: Spraying Salt onto your ware


Hey All:
Has anybody mixed salt and water into a spray bottle
and just lightly mist freshly glazed ware, pop it
into the kiln and Presto....... What could I expect?
Or is this a big no no?
(Watched a documentary on J.R. Tolkien the other day
What an amazing man, he wrote back to every person
that wrote him admiring his work. There is a man that
wasn't to Big for his Breeches.)
Kat
kat@digitalfire.com



____________________________________________________________________________
__
Send postings to clayart@lsv.ceramics.org

You may look at the archives for the list or change your subscription
settings from http://www.ceramics.org/clayart/

Moderator of the list is Mel Jacobson who may be reached at
melpots@pclink.com.

Kat in the Hat on wed 15 may 02


Hey All:
Has anybody mixed salt and water into a spray bottle
and just lightly mist freshly glazed ware, pop it
into the kiln and Presto....... What could I expect?
Or is this a big no no?=20
(Watched a documentary on J.R. Tolkien the other day
What an amazing man, he wrote back to every person
that wrote him admiring his work. There is a man that
wasn't to Big for his Breeches.)
Kat
kat@digitalfire.com=20

=20

June Perry on thu 16 may 02


Yes, I did that with my wood kiln. Just go lightly with the spray. Also, you
can check the clayart archives. There should be info in there on past
suggestions on soaking pots in a salt brine, which you might also want to
try.
Also, I used pure sea salt rather than iodized salt.

Regards,
June Perry