Ababi on wed 20 feb 02
White crackle to what firing, temperature?
I use for raku crackle a Dutch frit.
Ababi Sharon
Kibbutz Shoval- Israel
Glaze addict
ababisha@shoval.org.il
http://members4.clubphoto.com/ababi306910/
http://www.milkywayceramics.com/cgallery/asharon.htm
http://www.israelceramics.org/
---------- Original Message ----------
>Dear members,
>Going throng the archives I found some white-crackled glazes.
>Unfortunately, most of them contain frits or gerstly.
>As I live in Holland it is very difficult to buy most of the frits
>here.
>I have been testing different recipes but did not find a satisfactory
>result.
>Has anyone a good recipe for me?
>Should I make it white with 10 percent of zirconium?
>Greetings Cor Duijnker
>________________________________________________________________________
>______
>Send postings to clayart@lsv.ceramics.org
>You may look at the archives for the list or change your subscription
>settings from http://www.ceramics.org/clayart/
>Moderator of the list is Mel Jacobson who may be reached at
>melpots@pclink.com.
Cor Duijnker on thu 21 feb 02
Dear members,=20
Going throng the archives I found some white-crackled glazes.=20
Unfortunately, most of them contain frits or gerstly.=20
As I live in Holland it is very difficult to buy most of the frits here. =
I have been testing different recipes but did not find a satisfactory =
result.=20
Has anyone a good recipe for me?=20
Should I make it white with 10 percent of zirconium?
Greetings Cor Duijnker
Frans Boot on sun 3 mar 02
=0D
Maybe I've something for you send a mail to m.boot@hccnet.nl=0D
-------Original Message-------=0D
=0D
From: Cor Duijnker=0D
Date: woensdag 20 februari 2002 21:07:20=0D
To: CLAYART@LSV.CERAMICS.ORG=0D
Subject: White crackled glaze?=0D
=0D
Dear members, =0D
=0D
Going throng the archives I found some white-crackled glazes. =0D
=0D
Unfortunately, most of them contain frits or gerstly. =0D
=0D
As I live in Holland it is very difficult to buy most of the frits here. =
=0D
=0D
I have been testing different recipes but did not find a satisfactory res=
ult
=0D
=0D
Has anyone a good recipe for me? =0D
=0D
Should I make it white with 10 percent of zirconium?=0D
=0D
Greetings Cor Duijnker=0D
=0D
_________________________________________________________________________=
____
=0D
Send postings to clayart@lsv.ceramics.org=0D
=0D
You may look at the archives for the list or change your subscription=0D
settings from http://www.ceramics.org/clayart/=0D
=0D
Moderator of the list is Mel Jacobson who may be reached at melpots@pclin=
k.com.
| |
|
