search  current discussion  categories  glazes - cone 4-7 

glaze test for ac base wd-1, cone 6, oxidation.

updated thu 24 jan 02


Alisa og Claus Clausen on wed 23 jan 02

Glaze test for: Glaze test for AC base WD-1, cone 6, oxidation

Source: Alisa Clausen
Credited to: Tests devrived from Tony Hansen's 20 x 5 glaze base.

All tests fired on white, iron flecked, mid-range stoneware.
Fired to cone 6 (1220c) in oxidation.

Firing ramp:
100c (212f) per hour to 600c (1112f)
150c (302f) per hour to 1100c (2012f)
100c per hour to 1220c (2228f)
15 - 30 minute soak depending on matts and glosses used.
cool down 100c per hour to 900c.
Natural cool down to 150c (approximately 15 hours)


All raw materials measured up or down to nearest whole decimal.
Oxides used on percent basis to a 100 gram batch of glaze.


Resulted in:

Regards from Alisa in Denmark