search  current discussion  categories  materials - albany slip 

albany slip / 5 recipes

updated wed 12 dec 01

 

Snail Scott on tue 11 dec 01


Here are a few Albany slip recipes:

CASTLE ENGOBE 6^ ox/redux (my favorite)

7.95 Barium Carb
2.27 Lithium Carb
13.64 Whiting
25.00 Albany Slip
22.73 F-4 feldspar
28.41 OM-4 ball clay
+
13.64 Opax
2.27 Cobalt Carb
2.27 Manganese Diox
4.55 Rutile

This is a mottled matte gooey looking grey glaze,
but more stony that satiny. I like it best thick,
but it will hide fine detail. Because of the clay
content, I think it works best for one-shot firing,
applied to leather-hard clay. I make no claims
for food-safety, but it's spiffy on sculpture.
Clear glaze applied over it in patterns will make
cobalt-blue glossy streaky designs.


BURBOE GLAZE ^6 redux

6.8 Bone Ash
6.8 Barium Carb
11.4 Dolomite
2.3 Lithium Carb
22.7 Albany Slip
22.7 F-4 feldspar
27.3 OM-4 ball clay
+
9.1 Opax
4.5 Zinc Ox
2.3 RIO
2.3 Rutile

This is a mottled orange matte, brightest where
thickly applied. The colors also seem brighter in
reduction - in oxidation, it tends to be blah brown.
It shows texture if thin, but doesn't look as nice.
Again, no claims for food-safety. I also apply this
one to leather-hard clay.

HASKINVILLE GLAZE ^6 redux

2 Lithium Carb
2 Zinc Ox (calcined)
70 Albany Slip
12 Neph Sy
14 EPK
+
2 Copper Carb

This is a lovely glossy dark brown, slightly
transparent, with little tan speckles. In
oxidation, unfortunately, it looks truly nasty,
sort of an army-green color. Another good one
for one-shot firing; apply to leather-hard clay.
I'm guessing it's probably food-safe, but I've
never tested it. <----(BIG DISCLAIMER!)


Here is a more 'classic' Albany glaze for ^6:

BEANPOT BROWN GLOSS ^4-6

87.5 Albany slip
12.5 Neph Sy
1.0 Bentonite

Very traditional-looking. I'm guessing it's
probably foodsafe, too.


OPAQUE CHOCOLATE MATTE ^6

83.0 Albany Slip
10.8 Lithium Carb
6.0 Rutile
0.2 RIO

I have doubts about the food-safety of this one;
seems like a lot of lithium to me. I'd save it
for sculpture, personally.

(I think the first three of these recipes came
from an old CM, years ago, but I cannot credit
the actual source of any of them. Sorry.)

-Snail

Judith I. Marvin on tue 11 dec 01


Snail - Thanks so much for sharing the recipes. The castle engobe sounds
really interesting. Can't wait to give them a try. Appreciate your time
and effort. Judith

>From: Snail Scott
>Reply-To: Ceramic Arts Discussion List
>To: CLAYART@LSV.CERAMICS.ORG
>Subject: Re: albany slip / 5 recipes
>Date: Tue, 11 Dec 2001 10:23:48 -0800
>
>Here are a few Albany slip recipes:
>
>CASTLE ENGOBE 6^ ox/redux (my favorite)
>
> 7.95 Barium Carb
> 2.27 Lithium Carb
>13.64 Whiting
>25.00 Albany Slip
>22.73 F-4 feldspar
>28.41 OM-4 ball clay
>+
>13.64 Opax
> 2.27 Cobalt Carb
> 2.27 Manganese Diox
> 4.55 Rutile
>
>This is a mottled matte gooey looking grey glaze,
>but more stony that satiny. I like it best thick,
>but it will hide fine detail. Because of the clay
>content, I think it works best for one-shot firing,
>applied to leather-hard clay. I make no claims
>for food-safety, but it's spiffy on sculpture.
>Clear glaze applied over it in patterns will make
>cobalt-blue glossy streaky designs.
>
>
>BURBOE GLAZE ^6 redux
>
> 6.8 Bone Ash
> 6.8 Barium Carb
>11.4 Dolomite
> 2.3 Lithium Carb
>22.7 Albany Slip
>22.7 F-4 feldspar
>27.3 OM-4 ball clay
>+
> 9.1 Opax
> 4.5 Zinc Ox
> 2.3 RIO
> 2.3 Rutile
>
>This is a mottled orange matte, brightest where
>thickly applied. The colors also seem brighter in
>reduction - in oxidation, it tends to be blah brown.
>It shows texture if thin, but doesn't look as nice.
>Again, no claims for food-safety. I also apply this
>one to leather-hard clay.
>
>HASKINVILLE GLAZE ^6 redux
>
> 2 Lithium Carb
> 2 Zinc Ox (calcined)
>70 Albany Slip
>12 Neph Sy
>14 EPK
>+
> 2 Copper Carb
>
>This is a lovely glossy dark brown, slightly
>transparent, with little tan speckles. In
>oxidation, unfortunately, it looks truly nasty,
>sort of an army-green color. Another good one
>for one-shot firing; apply to leather-hard clay.
>I'm guessing it's probably food-safe, but I've
>never tested it. <----(BIG DISCLAIMER!)
>
>
>Here is a more 'classic' Albany glaze for ^6:
>
>BEANPOT BROWN GLOSS ^4-6
>
>87.5 Albany slip
>12.5 Neph Sy
> 1.0 Bentonite
>
>Very traditional-looking. I'm guessing it's
>probably foodsafe, too.
>
>
>OPAQUE CHOCOLATE MATTE ^6
>
>83.0 Albany Slip
>10.8 Lithium Carb
> 6.0 Rutile
> 0.2 RIO
>
>I have doubts about the food-safety of this one;
>seems like a lot of lithium to me. I'd save it
>for sculpture, personally.
>
>(I think the first three of these recipes came
>from an old CM, years ago, but I cannot credit
>the actual source of any of them. Sorry.)
>
> -Snail
>
>______________________________________________________________________________
>Send postings to clayart@lsv.ceramics.org
>
>You may look at the archives for the list or change your subscription
>settings from http://www.ceramics.org/clayart/
>
>Moderator of the list is Mel Jacobson who may be reached at
>melpots@pclink.com.


_________________________________________________________________
Send and receive Hotmail on your mobile device: http://mobile.msn.com