FireRight on sun 2 dec 01
Hello James ~
If you're looking for simple and inexpensive solutions to the
inconvenience of the switches, KilnSitter (http://www.kilnsitter.com) now
offers shut-offs featuring automatic turn-up and we
(http://www.fireright.com) also offer a variety of practical devices.
-=gw=-
----- Original Message -----
From: "James Clark"
To:
Sent: Sunday, December 02, 2001 10:10 AM
Subject: sitter kiln conversion
> Hi,
> This is my first posting. I have a gare kiln model 1822LT with a sitter
> kiln controller model LT 3K. This kiln has a 17.5" x 22.5" chamber with 5
> manual switches. I would like to upgrade this kiln with an automatic
> controller since it has only been fired a half dozen times. It has been
> sitting for quite a while!!! I would appreciate any assistance that you
can
> offer as to the type of controller that may apply to this situation.
> Thanks,
> James
>
>
____________________________________________________________________________
__
> Send postings to clayart@lsv.ceramics.org
>
> You may look at the archives for the list or change your subscription
> settings from http://www.ceramics.org/clayart/
>
> Moderator of the list is Mel Jacobson who may be reached at
melpots@pclink.com.
>
James Clark on sun 2 dec 01
Hi,
This is my first posting. I have a gare kiln model 1822LT with a sitter
kiln controller model LT 3K. This kiln has a 17.5" x 22.5" chamber with 5
manual switches. I would like to upgrade this kiln with an automatic
controller since it has only been fired a half dozen times. It has been
sitting for quite a while!!! I would appreciate any assistance that you can
offer as to the type of controller that may apply to this situation.
Thanks,
James
Jim Cullen on sun 2 dec 01
Jams,
Contact Tim Frederick at Orton, don't have the e-mail address available but
it's easy to find Orton on the web. Tim monitors Clayart and will probably
get in touch with you soon.
"The only thing wrong with a beautiful drive to work
is that you still end up at work."
KEEP CENTERED
Cullen
Naperville, Illinois
----- Original Message -----
From: James Clark
To:
Sent: Sunday, December 02, 2001 9:10 AM
Subject: sitter kiln conversion
> Hi,
> This is my first posting. I have a gare kiln model 1822LT with a sitter
> kiln controller model LT 3K. This kiln has a 17.5" x 22.5" chamber with 5
> manual switches. I would like to upgrade this kiln with an automatic
> controller since it has only been fired a half dozen times. It has been
> sitting for quite a while!!! I would appreciate any assistance that you
can
> offer as to the type of controller that may apply to this situation.
> Thanks,
> James
>
>
____________________________________________________________________________
__
> Send postings to clayart@lsv.ceramics.org
>
> You may look at the archives for the list or change your subscription
> settings from http://www.ceramics.org/clayart/
>
> Moderator of the list is Mel Jacobson who may be reached at
melpots@pclink.com.
>
| |
|
