search  current discussion  categories  glazes - misc 

glaze additive-hardener

updated wed 21 nov 01

 

Wade Blocker on mon 19 nov 01


Les,
If you add a binder to your glaze it should not dust off. I personally
add 1% of macaloid to all my glazes. CMC or bentonite might help also. Mia
in ABQ

Leslie Wright on mon 19 nov 01


My glaze tends to brush off the pot after it has dried . I was wondering
what and how much of some additive I could add that would harden the glaze
to the pot and make it more manageable to work with. (maybe starch - how
much)

Thanks in advance.

Les Wright

Marcia Selsor on mon 19 nov 01


You can use diluted starch in water. Say 1-2 tablespoons in a cup of water.
This works for majolica and then the over glazing.
Good luck,
Marcia

Leslie Wright wrote:

> My glaze tends to brush off the pot after it has dried . I was wondering
> what and how much of some additive I could add that would harden the glaze
> to the pot and make it more manageable to work with. (maybe starch - how
> much)
>
> Thanks in advance.
>
> Les Wright
>
> ______________________________________________________________________________
> Send postings to clayart@lsv.ceramics.org
>
> You may look at the archives for the list or change your subscription
> settings from http://www.ceramics.org/clayart/
>
> Moderator of the list is Mel Jacobson who may be reached at melpots@pclink.com.

chris clarke on mon 19 nov 01


> My glaze tends to brush off the pot after it has dried

Les

I used carro syrup (sp??) in the past, then my glazes tended to smell after
a while. But it did harden them up, like a rock. = )

chris


temecula, california
chris@ccpots.com
www.ccpots.com

Tommy Humphries on mon 19 nov 01


Some things you can use...

Hairspray... just spray it on

CMC gum... mix with water and mix into the bucket of glaze

Syrup... use like gum (not recommend if the glaze is going to sit for a
while... it will ferment)

There are many things to use to give a hard glaze surface... you will surly
get many suggestions.

Tommy


----- Original Message -----
From: "Leslie Wright"
To:
Sent: Monday, November 19, 2001 8:36 PM
Subject: glaze additive-hardener


> My glaze tends to brush off the pot after it has dried . I was wondering
> what and how much of some additive I could add that would harden the glaze
> to the pot and make it more manageable to work with. (maybe starch - how
> much)
>
> Thanks in advance.
>
> Les Wright
>
>
____________________________________________________________________________
__
> Send postings to clayart@lsv.ceramics.org
>
> You may look at the archives for the list or change your subscription
> settings from http://www.ceramics.org/clayart/
>
> Moderator of the list is Mel Jacobson who may be reached at
melpots@pclink.com.
>

linda blossom on mon 19 nov 01


Leslie,

You can add 1% cmc or veegum to your dry glaze. Be sure to sieve it. Some
people mix it with water and then add it to the glaze. I can't speak for
that as I have always done it dry . It definitely will make the glaze
surface stronger.

Linda Blossom

Jim V Brooks on tue 20 nov 01


there are a number of things that you can use to accomplish this. The first
one might be the addition of bentonite or macaloid. You can add up to about
2% to your recipe without changing the results that you get.....usually!!!
Here again..test if you have questions. I have found that either of these
usually solves my problem..
Jim in
Denton

Ababi on tue 20 nov 01


Hello Les.
The best would be to reformulate the glaze to have more clay in it.
You may you also up to 2% CMC. It is not that easy. You start with
half% and go up. It is not easy because the glaze will dry slowly, you
might have or want to add another layer. It is a good solution, if you
do majolica to avoid mixing your painting solution with the background
as in this case you need it as it would be a paper.
Ababi Sharon
Kibbutz Shoval- Israel
Glaze addict
sharon@shoval.org.il
http://members4.clubphoto.com/ababi306910/
http://www.milkywayceramics.com/cgallery/asharon.htm
http://www.israelceramics.org/



---------- Original Message ----------

>My glaze tends to brush off the pot after it has dried . I was
>wondering
>what and how much of some additive I could add that would harden the
>glaze
>to the pot and make it more manageable to work with. (maybe starch -
>how
>much)

>Thanks in advance.

>Les Wright

>________________________________________________________________________
>______
>Send postings to clayart@lsv.ceramics.org

>You may look at the archives for the list or change your subscription
>settings from http://www.ceramics.org/clayart/

>Moderator of the list is Mel Jacobson who may be reached at
>melpots@pclink.com.

Steve Mills on tue 20 nov 01


An old Majolica painter's trick is to add 1 dessert spoon of dissolved
sugar per gallon to the glaze: the sugar migrates to the surface on
drying giving a crisp surface on which to paint. Could help handling
problems as well.

Steve
Bath
UK


In message , Leslie Wright writes
>My glaze tends to brush off the pot after it has dried . I was wondering
>what and how much of some additive I could add that would harden the glaz=
>e
>to the pot and make it more manageable to work with. (maybe starch - how
>much)
>
>Thanks in advance.
>
>Les Wright

--
Steve Mills
Bath
UK

Ron Roy on tue 20 nov 01


Hi Les,

First thing to do is replace ant kaolin with ball clay but do it by the
molecular formula - that way you get more clay in the recipe (cause the is
less Al2O3 in Ball clay so you need more of it) and ball clay gives a
harder dry surface. If that is not good enough add some bentonite - that
gives an even tougher surface. If that doesn't make the surface stable
enough drop the benyonite and then try the solubles.

Solubles can be a pain in the --- if they are organic they rot, if they are
salts they can crystalize and migrate to rims adding more melting. Whatever
you do don't use any more then you have to.

RR

>My glaze tends to brush off the pot after it has dried . I was wondering
>what and how much of some additive I could add that would harden the glaze
>to the pot and make it more manageable to work with. (maybe starch - how
>much)
>
>Thanks in advance.
>
>Les Wright

Ron Roy
RR# 4
15084 Little Lake Rd..
Brighton,
Ontario, Canada
KOK 1H0
Residence 613-475-9544
Studio 613-475-3715
Fax 613-475-3513