search  current discussion  categories  glazes - ash 

iron, vol ash, magnets

updated fri 26 may 00

 

Paul Lewing on wed 24 may 00


priddy wrote:

>
> Could you use magnets to get some of the iron out, or have
> I remembered the physics backwards?

I don't think you could, Elisabeth. The iron is a chemical component of
the parent rock, not floating around loose. I think if you put a magnet
in the volcanic ash, either all of it would stick to the magnet or none
of it would. It wouldn't separate the iron from the rest of the ash.
Paul Lewing, Seattle

priddy on wed 24 may 00


Dave Finkelnburg wrote:

Could you use magnets to get some of the iron out, or have
I remembered the physics backwards?

> Mel,
> Ah, simplicity! How wonderful! Volcanic ash can be a great glaze
> ingredient.
> Those who haven't used it need to recognize what those who have use=
d it
> already know -- not all volcanic ashes are alike.
> Mel's Volcanic Ash glaze works with lots of colorants because the i=
ron
> content of the ash is relatively low.
> Mt. St. Helen's ash will produce some different results. It has a
> relatively high iron content, so it isn't as nice with coloring oxides.=
=

For
> those in the U.S., the midwest and New Mexico ash seems to be much lowe=
r in
> iron.


respectfully submitted,
elizabeth priddy

priddy-clay@usa.net
http:www.angelfire.com/nc/clayworkshop

____________________________________________________________________
Get free email and a permanent address at http://www.netaddress.com/?N=3D=
1

Dave Finkelnburg on thu 25 may 00


Hi Elizabeth!
Good question. I have no idea. Never tried it. If the iron were
present as magnetite, a magnet could work. I've seen this work on black
sands. I suspect, though, the iron is a substitution in the crystal lattice
of some of the minerals in the ash, and consequently not magnetic.
Dave Finkelnburg
-----Original Message-----
From: priddy
To: CLAYART@LSV.CERAMICS.ORG
Date: Wednesday, May 24, 2000 7:05 PM
Subject: iron, vol ash, magnets


Dave Finkelnburg wrote:

Could you use magnets to get some of the iron out, or have
I remembered the physics backwards?

> Mel,
> Ah, simplicity! How wonderful! Volcanic ash can be a great glaze
> ingredient.
> Those who haven't used it need to recognize what those who have used
it
> already know -- not all volcanic ashes are alike.
> Mel's Volcanic Ash glaze works with lots of colorants because the iron
> content of the ash is relatively low.
> Mt. St. Helen's ash will produce some different results. It has a
> relatively high iron content, so it isn't as nice with coloring oxides.
For
> those in the U.S., the midwest and New Mexico ash seems to be much lower
in
> iron.


respectfully submitted,
elizabeth priddy

priddy-clay@usa.net
http:www.angelfire.com/nc/clayworkshop

____________________________________________________________________
Get free email and a permanent address at http://www.netaddress.com/?N=1

____________________________________________________________________________
__
Send postings to clayart@lsv.ceramics.org

You may look at the archives for the list or change your subscription
settings from http://www.ceramics.org/clayart/

Moderator of the list is Mel Jacobson who may be reached at
melpots@pclink.com.