search  current discussion  categories  materials - misc 

destroyed less than perfect = grog?

updated mon 6 mar 00

 

David Hendley on sun 5 mar 00

High-fired clay is way too hard to practically crush for
use as grog.
Maybe some kind of heavy duty commercial roller or crusher
could do the job, but this is way beyond anything a potter
would have. Even a hammer mill is not up to this task; it
would wear down the hammers in no time.
You cannot ballmill because it would give you smooth, rounded
particles, and for grog you want angular pieces.

I grind up broken bisque ware for use as grog in my hammer
mill. Some of these pieces are broken after glazing, and the
glaze is not a problem in the claybody.

--
David Hendley
Maydelle, Texas
hendley@tyler.net
http://www.farmpots.com/



----- Original Message -----
From: jcjm
To:
Sent: Saturday, March 04, 2000 6:10 PM
Subject: destroyed less than perfect=grog?


| ----------------------------Original message----------------------------
| I was just wondering whether you could crush up a glazed, high fired piece
| of clay, taking the energy involved as granted, and use it as a filler or
| grog of some kind? Technically, would the glaze involved cause a problem
| in the clay body?
| Just wondering.
| j-m
|