search  current discussion  categories  kilns & firing - manufacturers 

paragon a66b wiring/ angie's list

updated fri 15 aug 08

 

Eleanora Eden on thu 14 aug 08


Hi Meg,

Your request for a recommended electrician in your area reminded me that on Car
Talk the guys recommend Angie's List to find out about who has a good rep in your area
for services. I have never tried to use it myself. But in a big city like Atlanta there ought to
be action on the list for you. I just looked at the website and it says it is free for one year,
whatever that means. Emailed them to find out more. Like how much the 2nd year costs!
The first category they listed was electricians.

Anybody have experience using Angie's List?

Eleanora


>I am getting my granddaughter a kiln wired, new line, in their garage the
>kiln label says 16 amps,[440, I think hubby called up to me ?], SO THE 200
>AMP BOX HAS 2 EMPTY SLOTS EACH SIDE AT BOTTOM. I am wondering if 220/20amps
>is adequate BREAKER and how far to locate kiln from the box and door [this
>is near house to garage door from home ,back from distant overhead garage
>doors] should I specify a seperate cut off breaker box next to the kiln as
>well as a dedicated breaker in the panel.I am thinking I may need a
>couple seperate 110 lines put in for an eventual wheel and maybe fan. What
>about where to locate a co3 /smoke/fire alarm ? This is a typical 20'' x
>20'' or so double garage in Atlanta area. Does anyone know an electrican in
>the 30041 zip,any chance?
>I want to have this done reasonably an also need to know the wire size to
>use and type.
>Thanks,
>Meg from Cumming,GA


--
Bellows Falls Vermont
www.eleanoraeden.com