search  current discussion  categories  wheels - misc 

my new kickwheel

updated mon 21 jan 08

 

Steve Slatin on sat 19 jan 08


Keba --

FWiW, and from what I can see, your
dad did a great job on the wheel. If it
fits you well, don't sweat the small
irregularities in the wheel head. It can
be replaced -- but a well-constructed
frame and a well balanced flywheel
are essential.

Best wishes -- Steve Slatin

Keba M Hitzeman wrote:
I just put some pictures on my blog to show the kickwheel my dad made for me
if you would like to see it!



http://yellowroomarts.blogspot.

---------------------------------
Be a better friend, newshound, and know-it-all with Yahoo! Mobile. Try it now.

Victoria E. Hamilton on sat 19 jan 08


Hi Keba -

Your wheel looks fabulous! Good thinking on casting the wheel in sections.
I remember when my Lockerbee was delivered - on a forklift!

Take care.

Vicki Hamilton
Millennia Antica Pottery
Seattle, WA where they are predicting temperatures in the low to mid-20s for
tomorrow! Amazing.

-----Original Message-----
From: Clayart [mailto:CLAYART@LSV.CERAMICS.ORG] On Behalf Of Keba M Hitzeman
Sent: Saturday, January 19, 2008 1:34 PM
To: CLAYART@LSV.CERAMICS.ORG
Subject: My new kickwheel

I just put some pictures on my blog to show the kickwheel my dad made for me
if you would like to see it!



http://yellowroomarts.blogspot.com



Keba





====================================



Keba Hitzeman

Dayton OH



Spanish - http://keba.hitzeman.com

Clay -
http://yellowroomarts.blogspot.com,
http://yellowroomarts.etsy.com

Coffee - coffee@enigma22.com



People sleep peaceably in their beds at night only because rough men stand
ready to do violence on their behalf.
George Orwell

____________________________________________________________________________
__
Clayart members may send postings to: clayart@lsv.ceramics.org

You may look at the archives for the list, post messages, or change your
subscription settings here: http://www.acers.org/cic/clayart/

Moderator of the list is Mel Jacobson who may be reached at
melpots2@visi.com

Keba M Hitzeman on sat 19 jan 08


I just put some pictures on my blog to show the kickwheel my dad made for me
if you would like to see it!



http://yellowroomarts.blogspot.com



Keba





====================================



Keba Hitzeman

Dayton OH



Spanish - http://keba.hitzeman.com

Clay -
http://yellowroomarts.blogspot.com,
http://yellowroomarts.etsy.com

Coffee - coffee@enigma22.com



People sleep peaceably in their beds at night only because rough men stand
ready to do violence on their behalf.
George Orwell

Keba M Hitzeman on sun 20 jan 08


The wheel itself is amazing, and super-smooth to work with. Solid as all
get out, and the flywheel is near perfectly balanced.

Plus, if the slight off-balance of my bats gets to me too much...I'll can
just drill another hole!

Keba


====================================

Keba Hitzeman
Dayton OH

Spanish - http://keba.hitzeman.com
Clay - http://yellowroomarts.blogspot.com, http://yellowroomarts.etsy.com
Coffee - coffee@enigma22.com

People sleep peaceably in their beds at night only because rough men stand
ready to do violence on their behalf.
George Orwell




-----Original Message-----
From: Clayart [mailto:CLAYART@LSV.CERAMICS.ORG] On Behalf Of Steve Slatin
Sent: Saturday, January 19, 2008 22:46
To: CLAYART@LSV.CERAMICS.ORG
Subject: Re: My new kickwheel

Keba --

FWiW, and from what I can see, your
dad did a great job on the wheel. If it
fits you well, don't sweat the small
irregularities in the wheel head. It can
be replaced -- but a well-constructed
frame and a well balanced flywheel
are essential.

Best wishes -- Steve Slatin

Keba M Hitzeman wrote:
I just put some pictures on my blog to show the kickwheel my dad made for
me
if you would like to see it!



http://yellowroomarts.blogspot.

---------------------------------
Be a better friend, newshound, and know-it-all with Yahoo! Mobile. Try it
now.

____________________________________________________________________________
__
Clayart members may send postings to: clayart@lsv.ceramics.org

You may look at the archives for the list, post messages, or change your
subscription settings here: http://www.acers.org/cic/clayart/

Moderator of the list is Mel Jacobson who may be reached at
melpots2@visi.com